GRUEN INTERNATIONAL SCHOOLS, PORT HARCOURTComputer assembly involves installing compatible components in the correct positions and connecting them safely.
Preparing for assembly:
1. Shut down and disconnect power.
2. Work on a clean, dry, static-safe surface.
3. Confirm component compatibility.
4. Organize screws and cables.
5. Consult the motherboard and component manuals.
Installing RAM:
• Locate the RAM slots on the motherboard.
• Check the motherboard manual for the recommended slot.
• Open the retaining clips where applicable.
• Align the notch on the RAM module with the key in the slot.
• Press evenly until the module is properly seated and the retaining clips engage.
• Never force the module if the notch does not align.
Installing HDD/SSD:
• Place the drive in its appropriate bay or mounting position.
• Secure it using the correct mounting method.
• Connect the appropriate data cable where required.
• Connect the appropriate power cable.
• Ensure cables are not obstructing fans.
Installing the PSU:
• Position the PSU correctly in the case.
• Secure it with the appropriate screws.
• Connect the main motherboard power connector and CPU power connector.
• Connect power to storage and other required components.
• Keep cables organized to improve airflow and make future maintenance easier.
After assembly, check all connections before powering the system. A component should never be forced into a connector.
Assignment
1.State the steps for installing RAM.
2.What cables may be required for a storage drive?
3.Why should component compatibility be checked?