GRUEN INTERNATIONAL SCHOOLS, PORT HARCOURTMeaning of Circuit Tracing
Circuit tracing is the process of following electrical connections on a circuit board to understand how current or signals move between components and to locate possible faults.
Using a Multimeter
A multimeter can assist in fault detection through several measurements.
A continuity test checks whether an electrical path exists between two points.
A meter may produce an audible sound when continuity is detected, depending on the meter.
Resistance measurement helps determine whether a component or circuit path has an expected resistance.
Important: Resistance measurements should generally be made on a de-energized circuit, following appropriate procedures.
Voltage measurements help determine whether the expected electrical potential is present at a test point.
Voltage measurements on powered equipment require particular care because incorrect connections can cause damage or injury.
Open Circuit
An open circuit is a broken electrical path through which current cannot flow normally.
Short Circuit
A short circuit is an unintended low-resistance path between points that should not be directly connected.
Basic Circuit-Tracing Procedure
Assignment
Explain how you would use a multimeter to check whether a simple wire is broken.
---