GRUEN INTERNATIONAL SCHOOLS, PORT HARCOURTRepair work requires the correct tool for each task.
Screwdrivers:
Used to remove and tighten screws. Common types include Phillips/cross-head and flat-head screwdrivers. Precision screwdrivers are useful for small electronic devices.
Spudger:
A spudger is a non-metallic or specially designed prying tool used to separate parts, open clips and disconnect certain connectors without unnecessarily damaging surfaces.
Multimeter:
A multimeter measures electrical quantities such as voltage, resistance and, depending on the instrument, current and continuity. Common uses include checking whether a circuit path is continuous, measuring voltage and checking resistance.
Soldering tools:
A basic soldering setup may include a soldering iron/station, solder, flux, soldering stand, tip-cleaning material and desoldering equipment. Soldering joins electronic components or wires using a controlled heat source and solder.
Other useful tools:
Tweezers, pliers, cutters, brushes, magnifying tools, anti-static equipment, cable testers and cleaning tools.
Safe tool practices:
• Select the correct tool size and type.
• Inspect tools before use.
• Keep electrical tools dry.
• Place a hot soldering iron on its stand; never leave it unattended.
• Work in a suitable ventilated area when soldering.
• Do not touch hot metal parts.
• Disconnect power when a tool is not in use.
• Store tools properly after use.
A multimeter should be set to the correct function/range before measurement. Incorrect settings or connections can damage the meter or circuit.
Assignment
1.What is a multimeter used for?
2.State three uses of a screwdriver/spudger.
3.Mention four soldering safety precautions.